Project for the additive manufacturing of an expansion vessel for hydraulic winches used in towing maritime vessels

Authors

DOI:

https://doi.org/10.47385/cadunifoa.v21.n56.6524

Keywords:

Towing winch, Expansion vessel, Additive manufacturing, FDM, Polymers

Abstract

International Maritime Organization (IMO) Resolution A.765(18) establishes guidelines for the design of marine towing systems that ensure strength, reliability, and safety under both normal and emergency conditions, while also providing for secondary operating mechanisms in the event of failure. In this context, this study aims to develop a conceptual design for a hydraulic expansion vessel - intended for installation on marine towing winches - manufactured via additive manufacturing. Initially, the characteristics of a metal vessel model used in offshore environments were analyzed, mechanical strength and volume parameters were defined, and a polymeric material meeting the expansion vessel design requirements was selected. Finally, Fused Deposition Modeling (FDM) additive manufacturing technology was employed to fabricate the vessel. The conceptual design developed in this study was based on the specific characteristics of FDM technology, aiming to establish a solid foundation for further research and validation of the developed product. This work will contribute to the improvement of marine hydraulic components - aligned with IMO regulatory requirements - and to technological advancements in additive manufacturing applied to naval engineering.

Downloads

Download data is not yet available.

Author Biographies

Adriana Cruz do Bonfim, Universidade Federal Fluminense, UFF, Niterói, Rio de Janeiro, Brasil

Doutoranda do Programa de Pós-graduação em Montagem Industrial da UFF

Lucas Benini, Universidade Federal Fluminense, UFF, Niterói, Rio de Janeiro, Brasil

Professor Dr. da UFF

 

 

Roger Matsumoto Moreira, Universidade Federal Fluminense, UFF, Niterói, Rio de Janeiro, Brasil

Professor Dr. da UFF

Walber Paschoal da Silva, Universidade Federal Fluminense, UFF, Niterói, Rio de Janeiro, Brasil

Professor Dr. da UFF.

Erik Gustavo del Conte, Universidade Federal do ABC (UFABC), Santo André, São Paulo, Brasil

Professor Dr. da UFABC

References

CALIGNANO, F.; MERCURIO, V. An overview of the impact of additive manufacturing on supply chain, reshoring, and sustainability. Cleaner Logistics and Supply Chain, v. 7(100103), p.01-10, 2023. doi: https://doi.org/10.1016/j.clscn.2023.100103

FALKONAKIS, I.; LOTFIAN, S.; YETER, B. Multi-criteria decision analysis of an innovative additive manufacturing technique for onboard maintenance. Sustainability, v. 16(3763). 03-18, 2024. https://doi.org/10.3390/su16093763

GIBSON, I.; ROSEN, D. W.; STUCKER, B. Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing. 2. ed. New York: Springer, 2015.

HÄLLGREN, S.; PEJRYD, L.; EKENGREN, J. Additive manufacturing and high-speed machining: Cost comparison of short lead time manufacturing method. Procedia CIRP, v. 50, p. 384-389, 2016. https://doi.org/10.1016/j.procir.2016.05.049

KORNIEJENKO, K.; GĄDEK, S.; DYNOWSKI, P.; TRAN, D. H.; RUDZIEWICZ, M.; POSE, S.; GRAB, T. Additive manufacturing in underwater applications. Applied Sciences, v. 14(4), p. 01-20, 2024. https://doi.org/10.3390/APP14041346

LIMA JUNIOR, Mouaci Almeida. Sistema de guinchos de embarcações de manuseio de âncoras, 2014. Monografia (Curso de Aperfeiçoamento para Oficial de Máquinas), Centro de Instrução Almirante Graça Aranha, Rio de Janeiro, 2014.

MORAIS JUNIOR, J. M. Petróleo em águas profundas: uma história tecnológica da Petrobras na exploração e produção offshore. Ipea; Petrobras, Brasília, Brasil, 2013.

NUNES, V. R. et al. Sistema de produção e distribuição de energia elétrica em um AHTS (Anchor Handling Tug Supply). Revista Naval e Oceânica, Rio de Janeiro, v. 1, p. 37-53, 2024. https://doi.org/10.12957/rno.2024.87890

O'NEILL, F.; MEHMANPARAST, A. A review of additive manufacturing capabilities for potential application in offshore renewable energy structures. Forces in Mechanics, v. 14, p. 100-255, 2024.https://doi.org/10.1016/j.finmec.2024.100255

SINOTTI, J. N. Manufatura 4.0: entendendo a evolução. [S.l.]: Publicação independente, 2023.

VALLADÃO, Marcos de Oliveira Dias. Solução de docagem para estaleiro de reparo de embarcações de apoio offshore. 2016. Trabalho de Conclusão de Curso (Engenharia Naval e Oceânica), Escola Politécnica, Universidade Federal do Rio de Janeiro, Rio de Janeiro, 2016.

ZAVVAR, E.; ROSA-SANTOS, P.; TAVEIRA-PINTO, F.; GHAFOORI, E. Lifetime extension of offshore support structures of wind turbines: A review. Renewable and Sustainable Energy Reviews, v. 217(115788), p. 01-27, 2025 https://doi.org/10.1016/j.rser.2025.115788

Published

2026-11-19

How to Cite

CRUZ DO BONFIM, Adriana; BENINI, Lucas; MATSUMOTO MOREIRA, Roger; PASCHOAL DA SILVA, Walber; GUSTAVO DEL CONTE, Erik. Project for the additive manufacturing of an expansion vessel for hydraulic winches used in towing maritime vessels. Cadernos UniFOA, Volta Redonda, RJ, v. 21, n. 56, p. 1–20, 2026. DOI: 10.47385/cadunifoa.v21.n56.6524. Disponível em: https://revistas.unifoa.edu.br/cadernos/article/view/6524. Acesso em: 20 nov. 2026.

Issue

Section

Tecnologia e Engenharias