Microscopia eletrônica de transmissão da liga Ti-10Mo-20Nb envelhecida após forjamento a quente

Autores

  • Sinara Borborema Gabriel UniFOA
  • Renato Baldan IPEN
  • Juliana Torres UniFOA
  • Carlos Angelo Nunes USP
  • Paulo Mei UNICAMP
  • Nathalia Rodrigues Oliveira UniFOA

DOI:

https://doi.org/10.47385/cadunifoa.v9.n25.204

Palavras-chave:

Ligas de Ti, Microestrutura, biomateriais, processamento

Resumo

Ligas de Ti são muito utilizadas em aplicações biomédicas. Dentro desta classe, as ligas de Ti do tipo β metaestável se destacam, pois através de processamentos termomecânicos é possível obter propriedades mecânicas e em especial, um módulo de elasticidade adequados para aplicação biomédica.  Estas ligas para serem usadas em aplicações ortopédicas requerem um balanço entre alta resistência mecânica e baixo módulo de elasticidade a fim de evitar o efeito “stress shielding” Estudos preliminares mostraram que a microestrutura da liga Ti-10Mo-20Nb após forjamento a frio e envelhecimento  a 500 °C /24 h apresentou uma distribuição bimodal da fase α  na matriz β. O objetivo deste trabalho foi caracterizar microestruturalmente a liga Ti-10Mo-20Nb na condição envelhecida  a 500 °C por 24h  após forjamento a quente. A caracterização microestrutural consistiu em análises por difração de raios X e microscopia eletrônica de transmissão. De acordo com os resultados obtidos, enquanto o forjamento a frio acarretou numa distribuição bimodal da fase alfa na matriz beta, o forjamento a quente acarretou numa precipitação fina e homogênea da fase alfa na matriz beta.

Downloads

Não há dados estatísticos.

Biografia do Autor

Sinara Borborema Gabriel, UniFOA

Possui graduação em Engenharia Industrial Química pela Escola de Engenharia de Lorena (2002), mestrado em Engenharia de Materiais pela Escola de Engenharia de Lorena (2004). Doutorado em Engenharia Metalúrgica e de Materiais pela Universidade Federal do Rio de Janeiro (biomateriais), tendo participado do programa de doutorado sanduíche (CNPq) na Universidade Livre de Bruxelas (Bélgica). Tem experiência na área de Engenharia de Materiais e Metalúrgica, com ênfase em Transformação de Fases, Microscopia Eletrônica de Transmissão e Difração de raios-X. Sua atuação em pesquisa envolve os seguintes temas: estudo de superligas de Ni, desenvolvimento de ligas de Titânio para aplicação biomédica, estudo dos processos de hidrogenação e desidrogenação de metais refratários e estudo de ligas ternárias como Nb-Si-B (diagrama de fases)

Referências

BANERJEE, R., NAG, S., FRASER, H. L., A novel combinatorial approach to the development of beta titanium alloys for orthopaedic implants, Materials Science and Engineering C, v. 25, pp. 282-289, 2005.

BAPTISTA, C. A. R. P., SCHNEIDER, S. G., TADDEI, E. B., et al., Fatigue behavior of arc melted Ti-13Nb-13Zr alloy, International Journal of Fatigue, v. 26, pp. 967-973, 2004.

BOEHLERT, C.J., COWEN, C.J., JAEGER, C.R., et al., Tensile and fatigue evaluation of Ti-15Al-33Nb (at. %) and Ti-21Al-29Nb (at.%) alloys for biomedical applications, Materials Science and Engineering C, v. 25, pp. 263-275, 2005.

CREMASCO, A., OSÓRIO, W. H., FREIRE, C. M. A., et al., Electrochemical corrosion behavior of a Ti-35Nb alloy for medical prostheses, Electrochimica Acta, v. 53, p. 4867-4874, 2008.

GABRIEL, Sinara Borborema. Processamento e caracterização de ligas Ti-Mo-Nb para aplicações biomédicas, 2008, Tese de Doutorado, COPPE/UFRJ, Rio de Janeiro, 2008.

GABRIEL, S. B., NUNES, C. A., SOARES, G. A., 2008, “Production, Microstructural Characterization and Mechanical Properties of Ti-10Mo-xNb alloys”, Artificial Organs, v.32, n. 4, pp. 299-304.

GABRIEL, S. B., DE ALMEIDA, L. H., NUNES, C. A., DILLE, J., SOARES, G. A, Maximisation of the ratio of microhardness to the Young's modulus of Ti-12Mo-13Nb alloy through microstructure changes. Materials Science & Engineering. C, Biomimetic Materials, Sensors and Systems, v.33, pp.3319 - 3324, 2013.

GORDIN, D. M., GLORIANT, T., NEMTOI, G. et al., Synthesis, structure and electrochemical behavior of a beta Ti-12Mo-5Ta alloy as new biomaterial, Materials Letters, v. 59, pp. 2959-2964, 2005.

HO, W. F.; JU, C. P.; CHERN LIN, J. H., Structure and properties of cast binary Ti-Mo alloys”, Biomaterials, v. 20, pp. 2115-2122, 1999.

IVASISHIN, O. M., MARKOVSKY, P. E., SEMIATIN, S. L., et al., Aging response of coarse-and fine-grained b titanium alloys, Materials Science and Engineering, v. 405, pp. 296-305, 2005.

KRAUS W. and NOLZE , G. J. Appl. Cryst., v..29, p 301-303, 1996.

KUMAR, S., NARAYANAN, T. S. N. S., Corrosion behavior of Ti-15Mo alloy for dental implant applications”, Journal of Dentistry, v. 36, pp. 500-507, 2008.

KURODA, D., NIINOMI, M., MORINAGA, M., et al., Design and mechanical properties of new  type titanium alloys for implant materials, Materials Science and Engineering A, v. 243, pp. 244-249, 1998.

LI, S. J., YANG, R., LI. S., et al., Wear characteristics of Ti-Nb-Ta-Zr and Ti-6Al-4V alloys for biomedical applications, Wear, v. 257, p. 869-876, 2004.

LI, S. J. CUI, T. C., HAO, Y. L., et al., Fatigue properties of a metastable β-type titanium alloy with reversible phase transformation, Acta Biomaterialia, v. 4, pp. 305-317, 2008.

MAJUMDAR, P., SINGH, S. B., CHAKRABORTY, M., “Elastic modulus of biomedical titanium alloys by nano-indentation and ultrasonic techniques – A comparative study”, Materials Science and Engineering A, v. 489, pp. 419-425, 2008.

MATSUMOTO, H., WATANABE, S., HANADA, S., Microstructures and mechanical properties of metastable β TiNbSn alloys cold rolled and heat treated, Journal of Alloys Compounds, v.439, pp. 146-155, 2007.

NAG, S., BANERJEE, R., FRASER, H.L., A novel combinatorial approach for understanding microstructural evolution and its relationship to mechanical properties in metallic biomaterials, Acta Biomaterialia, v. 3, pp. 369-376, 2007.

NIINOMI, M., AKAHORI, T., TAKEUCHI, T., et al., Mechanical properties and cyto-toxicity of new beta type titanium alloy with low melting points for dental applications, Materials Science and Engineering C, v. 25, pp. 417-425, 2005.

RAABE, D., SANDER, B., FRIÁK, M., et al., Theory-guided botton-up design of β-titanium alloys as biomaterials based on first principles calculations: Theory and experiments, Acta Materialia, v. 55, p. 4475-4487, 2007.

TANE, M., AKITA, S., NAKANO, T., et al., Peculiar elastic behavior of Ti-Nb-Ta-Zr single crystals, Acta Materialia, v. 56, pp. 2856-2863, 2008.

VILLARS, P.; CALVERT, L.D. Pearson’s Handbook of Crystallographic Data for Intermetallic phases, 2º ed., ASM International, Materials Park, four vol, 1991.

XU, W., KIM, K.B., DAS, J., et al., Phase stability its effect on the deformation behavior of Ti-Nb-Ta-In/Cr alloys, Scripta Materialia, v. 54, p. 1943-1948, 2006.

ZHOU, Y. L., NIINOMI, M., AKAHORI, T., et al., Corrosion resistance and biocompatibility of Ti-Ta alloys for biomedical applications, Materials Science and Engineering A, v. 398, p. 28-36, 2005.

Downloads

Publicado

10-08-2014

Como Citar

GABRIEL, Sinara Borborema; BALDAN, Renato; TORRES, Juliana; NUNES, Carlos Angelo; MEI, Paulo; OLIVEIRA, Nathalia Rodrigues. Microscopia eletrônica de transmissão da liga Ti-10Mo-20Nb envelhecida após forjamento a quente. Cadernos UniFOA, Volta Redonda, v. 9, n. 25, p. 45–50, 2014. DOI: 10.47385/cadunifoa.v9.n25.204. Disponível em: https://revistas.unifoa.edu.br/cadernos/article/view/204. Acesso em: 29 mar. 2024.

Edição

Seção

Tecnologia e Engenharias

Artigos Semelhantes

1 2 3 4 > >> 

Você também pode iniciar uma pesquisa avançada por similaridade para este artigo.

Artigos mais lidos pelo mesmo(s) autor(es)